The machine
Semiautomatic twin column bandsaw, hydraulically driven. Especially adapt to cut sections of steelwork, tubes and solids.
• Possibility to make cuts with variable angle up to 60° to the left, with the manual shifting of the saw frame.
• Steel sawframe with tubular section; worktable supported by a central pivot with preloaded bearings.
• Sawframe movement onto an electro welded column of big dimension, through two recirculating ballscrews linear guides.
• Pulley diameter 520 mm. Long-Life monobloc motoreducer.
• Registrable band guides with hard metal pads and guided bearings.
• Electronic Inverter for variable blade speed.
• Automatic control of the beginning and end cut through a feeler pin; regulation of the descent of the arc and strength of the penetration through the console.
• Mechanical tensioning of the blade with a control micro switch.
• Sawframe canted 6° allows sawblade to freely and easily cut through the bottom of structural section without vibration, binding, or slowdown of sawing rates.
• Cutting capacity at 90 °, round till 120 mm., square till 100 mm., rectangular till 180x100 mm.
Features
.jpg)
Minimal lubrication system OPTIONAL
It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.
Scale H 601On the saws H 601 the reading of the cutting is done through graduations easy to read positioned in front of the machine
Pulleys H 601
The H 601 saws have cast iron big pulleys to avoid excessive strain of the blade.
Wide chip collector
As standard the bandsaws Model KS have a wide chip collector
Mobile Console
Imet saws have as standard a mobile console for easy positioning of in accordance with the work to be performed.
Technical data
| Area angular cut |
° |
90 / +30 |
| Cutting capacity at 90°: round / square / rectangular |
mm. |
500 / 450 / 610x440 |
| Cutting capacity at 90°: rectangular with cutting bundle |
mm. |
600x250 max 150x50 min |
| Blade dimensions |
mm. |
5320 x 34 x 1.1 or on request 5320 x 41 x 1.3 |
| Blade Motor Power |
KW |
3 or on request 4 |
| Blade speed |
mt/min. |
15÷100 |
| Motor hydraulic unit |
KW |
0.75 |
| Tank Capacity of the hydraulic unit |
Lt |
20 |
| Capacity coolant tank |
Lt |
60 |
| Dimensions ( B x L x H ) |
mm. |
1500x2850x2170 |
| Height fo the work-table |
mm. |
820 |
| Weight |
Kg |
1700 |
| Type of functioning |
|
Semiautomatic hydraulic |
| Suitable for cutting: |
|
Steel / cast iron / high-strength steels / alloys
|
